>>>單面導通碳膜系列產品選用納米級超導碳黑、碳納米管及石墨烯為原料，采用特殊壓合工藝成膜后再與基材進行貼合。以上工藝所制成的復合碳膜，面阻均勻穩定，材質整體均一耐彎折，通過后期客戶的封裝工藝，可以實現耐酸、耐油、耐熱、耐寒、阻燃及抗氧化，使用壽命可達20年以上。不導電面具有良好的印刷性能，可根據需要印刷各種標示圖案，滿足個性化的LOGO需求。

>>> The series of single-side conductive carbon films are made of nano-superconducting carbon black, carbon nanotubes and graphene, and then bonded to the substrate by a special pressing process. The composite carbon film prepared by the above process has uniform and stable surface resistance and uniformly bending-resistant material as a whole. Through the packaging process of the later customers, the composite carbon film can be acid-resistant, oil-resistant, heat-resistant, cold-resistant, flame-retardant and oxidation-resistant, and has a service life of more than 20 years. Non-conductive surface has good printing performance, can print a variety of logo patterns according to needs, to meet the personalized LOGO requirements.

應用于理療電極、電磁屏蔽、電熱等產品。

Used in physiotherapy electrodes, electromagnetic shielding, electric heating and other products.

主要技術參數如下：

The main technical parameters are as follows:

●常規方阻General square resistance：10~100,000Ω/□

●厚度Thickness：20~400μm 

●寬度bbbbb：5~1500mm

●長度不限Unlimited length

●常規使用溫度Conventional service temperature：-20~160℃

●極端耐溫性Extreme temperature resistance：-40~220℃