項目詢價 及 相關授權經銷商查詢，請聯系：

電話：021-52287226（直線）

郵箱：shanghai@circutor.com

中國大陸及港澳臺地區，現由CIRCUTOR（西谷鐸）大中華區辦事處： CIRCUTOR(西谷鐸)Shanghai上海統一負責管理

CVM-A1500A-ITF-485-ICT2

CVM-A1500A-ITF-485-ICT2, Power quality analyzers with recording of quality events and transients Calibration Certificate (IEC 61000-4-30 Ed.2) Class A

Code: M563110000A00

•  Protocol: Modbus/RTU | BACnet | webserver (HTTP) | XML | HTML5
•  Memory: 200 MB
•  Memory: Yes
•  Events / Waveform: Yes
•  Certification: IEC 61000-4-30 (Class A)
•  Energy accuracy: 0,2S (.../5A)
•  Communications: RS-485 | Ethernet
•  Transistor output: 2
•  N? relays: 2
•  Digital inputs: 2
•  Harmonics: 63
•  Input current: .../5 A | .../1 A | 250 mA
•  Mounting: Pannel
•  Modules: 144 x 144

DESCRIPTION

CVM-A1500 is a panel mounted power quality analyzer with EMS (Energy Management Software) integrated. Its internal Web Server (html5) allows any user to have full installation control by using any web browser.

Designed to be installed in the most relevant or critical part of electric installations since it registers and monitors a wide range of variables (almost one year of data with RMS, maximum and minimum values). The device also registers power quality events such as swells, dips, interruptions (every half cycle) and transients (according to IEC 61000-4-30 Class A). Any event will be immediately captured with the voltage and current waveform.

This model adds the measurement of power quality variables (defined in the standard EN 50160) such as flicker, unbalance (Kd) and asymmetry (Ka) coefficients or voltage and current harmonics decomposition up to 63th.  In addition it is possible to monitor in real time the instantaneous waveforms of voltage and current through its oscilloscope function.

As an added value, CVM-A1500 displays the number of events and transients on each affected phase with the level reached, duration and its associated waveform. In addition, those events are directly displayed in CBEMA, ITIC y SEMI-F47 graphs.

The smart design of the CVM-A1500 allows users to customize their own screens in order to access to the information faster and easy. Remark that the device allows the connection though PowerStudio software to save and store, in a redundant way, all the information in a server or PC avoiding memory limits.

• Dimensions:144 x 144 mm
• Energy Management Software (EMS) included with historical data register
• Register of power quality events, waveforms and instantaneous parameters.
• Expandable up to 3 modules (inputs/outputs and communications)
• VGA color display with high definition
• IP 65 with airtight seal
• 5 voltage channels + 4 ITF current channels
• Active energy class 0,2S (IEC 62053-22)
• Universal switching power supply AC/DC or DC
• Ethernet communications (Web Server) + RS-485 (ModBus RTU or BACnet protocol)
• 5 user customizable screens
• 3 tariffs (selectable by digital input or by communications)
• Cost calculation(any currency) and emissions of kgCO₂
• 2 relay outputs for alarms + 2 transistor outputs for alarms or pulses + 2 digital inputs to select tariff, to control logical states or pulse centralizer from any external meter.

APPLICATIONS

• Control, monitoring and logging of the power quality in High and Low Voltage distribution panels. Performed directly or remotely thanks to its WEB server. Integration in SCADA systems through XML requests.
• 4 alarms (2 per transistor and 2 per relay), fully and independently programmable according to a low or high value, hysteresis, connection/disconnection delays, normally open or closed standby status and interlocking.
• Generation of impulses with transistor outputs, fully and independently configurable over any incremental parameter (energy, costs, kgCO₂, total meter or tariff hours).
• Transducer converting analogue signals to any instantaneous parameter measured or calculated by the unit, with built-in expansion modules with analogue outputs.
• Display of process signals featuring a built-in expansion module with analogue inputs, with optional reporting of these signals to SCADA systems through communications systems.
• Control of electrical load or alarm signal operations by programming the transistor or relay outputs that are built-in or added through expansion modules.
• Datalogger integrated with Web server and XML (log of historical data).

AC POWER SUPPLY

DC POWER SUPPLY

MECHANICAL CHARACTERISTICS

ENVIRONMENTAL CHARACTERISTICS

STANDARDS

CURRENT MEASUREMENT CIRCUIT

VOLTAGE MEASUREMENT CIRCUIT

COMMUNICATIONS

USER INTERFACE

DIGITAL INPUTS

DIGITAL RELAY OUTPUTS

DIGITAL TRANSISTOR OUTPUTS

MEASUREMENT ACCURACY