DG65型多功能粉碎機、

一、    適用范圍及性能特點

DG65型多功能粉碎機系列是我廠定型產品，它是粉碎各種木屑、秸稈、雜草、玉米、大豆及PVC發泡板最理想的設備，該系列結構合理，堅固耐用、安全可靠、操作方便、振動微小、效率高。主要適用于飼料廠、養殖廠、有機肥廠、中草藥、化工等，深受廣大客戶歡迎。

二、工作過程

 需粉碎的物料通過上機殼進料口進入粉碎室，在高速旋轉的錘片打擊和篩板摩擦作用下物料逐漸被粉碎，并在離心力和氣流作用下穿過篩孔從底座出料口排出。

三、主要技術參數和性能指標

（一）   主要技術參數

(二) 性能指標

本系列粉碎機在正確安裝，吸風良好，使用正常情況下，性能指標如下：

注：粉碎原料品種水分不大于14%，開孔率低于33%。

1. Application Scope and Feature：

“Shuanghe" brand DG series multi functional hammer mill is the styling products of our factory, it is the ideal equipment for crushing all kinds of straw, grass, corn, soybeans, and PVC foam board. Reasonable in structure, sturdy and durable, safe and reliable, convenient in operation, and of small vibration, and high efficiency,, this series of machine is widely applied in feed factories, farms, organic fertilizer plants, Chinese herbal medicine, chemical industry, etc.

2. Working Process：

Through feeding inlet on the shell, the material to be crushed enters into the crushing chamber, then it is crushed gradually under the crushing of the rapidly rotating hammer and the friction of the sieve plate,then from the discharge port on the base machine,the material would be released through the sieve hole under the function of the centrifugal force and air flow.

3.Main Technical Parameters And Performance Indicators：

3.1 Main Technical Parameters:

3.2 Performance Indicators:

The performance indicators are as follows under condition of appropriate installation good suction and normal application.

Note: the water content of the raw material should be no more than 14%, and the opening rate be higher than 33%.