EK1521 | 單端口 EtherCAT 光纖分支耦合器BECKHOFF倍福ek1520耦合器ek1521 全新現貨端子模塊
In conjunction with an EK1100 EtherCAT Coupler, the EK1521 1-port EtherCAT fibre optic junction enables conversion from 100BASE-TX to 100BASE-FX physics (glass fibre). Distances of up to 2 km can be bridged with the EK1521 and the EK1501 EtherCAT Coupler for multimode fibre optics. Even cable redundant systems with fibre optic can be realised using the 1-port EtherCAT fibre optic junction. The run LED shows the status of the EK1521.
若與 EtherCAT 耦合器 EK1100 配套使用，單端口 EtherCAT 光纖分支耦合器 EK1521 可以將 100BASE-TX 物理層轉換成 100BASE-FX 物理層（玻璃光纖）。如果最大距離達到 2 千米，可通過用于多模光纖的 EK1521 和 EK1501 系列 EtherCAT 耦合器進行橋接。用于單模光纖的 EK1521-0010 和 EK1501-0010 允許的最大距離為 20 千米。采用單端口 EtherCAT 光纖分支耦合器甚至還可以實現帶光纖的電纜冗余系統。端子模塊上的 LED 顯示 EK1521 的工作狀態。
In conjunction with an EK1100 EtherCAT Coupler, the EK1521 1-port EtherCAT fibre optic junction enables conversion from 100BASE-TX to 100BASE-FX physics (glass fibre). Distances of up to 2 km can be bridged with the EK1521 and the EK1501 EtherCAT Coupler for multimode fibre optics. Even cable redundant systems with fibre optic can be realised using the 1-port EtherCAT fibre optic junction. The run LED shows the status of the EK1521.BECKHOFF倍福ek1520耦合器ek1521 全新現貨端子模塊
|
Technical data
|
EK1521
|
|
Task within EtherCAT system
|
coupling of EtherCAT junctions via multimode glass fibre
|
|
Data transfer medium
|
multimode glass fibre 50/125 ?m (MM)
|
|
Distance between stations
|
max. 2000 m (100BASE-FX)
|
|
Number of EtherCAT Terminals
|
–
|
|
Type/number of peripheral signals
|
–
|
|
Protocol
|
EtherCAT
|
|
Delay
|
approx. 1 ?s
|
|
Data transfer rates
|
100 Mbaud
|
|
Configuration
|
not required
|
|
Bus interface
|
1 x SC Duplex
|
|
Power supply
|
from E-bus
|
|
Current consumption E-bus
|
typ. 350 mA
|
|
Current consumption 24 V DC
|
–
|
|
Weight
|
approx. 65 g
|
|
Operating/storage temperature
|
-25…+60 °C/-40…+85 °C
|
|
Relative humidity
|
95 %, no condensation
|
|
Vibration/shock resistance
|
conforms to EN 60068-2-6/EN 60068-2-27
|
|
EMC immunity/emission
|
conforms to EN 61000-6-2/EN 61000-6-4
|
|
Protect. class/installation pos.
|
IP 20/variable
|
|
Approvals
|
CE, UL, Ex
|
|
Further fibre optic products
|
|
|
EK1521-0010
|
1-port EtherCAT singlemode fibre optic junction, distance between stations up to 20 km
|
|
EK1501
|
EtherCAT Coupler with ID switch, multimode fibre optic for E-bus terminals (ELxxxx)
|
|
EK1501-0010
|
EtherCAT Coupler with ID switch, singlemode fibre optic for E-bus terminals (ELxxxx), distance between stations up to 20 km
|
|
EK1501-0100
|
EtherCAT Coupler, media converter (multimode fibre optic to RJ45) with ID switch
|
|
CU1521
|
EtherCAT media converter fibre optic, IP20
|
|
EP9521
|
EtherCAT/Industrial Ethernet module EP9521 for Industrial Fast Ethernet/100 Mbaud
|
BECKHOFF倍福ek1520耦合器ek1521 全新現貨端子模塊EtherCAT 擴展端子
與 E 總線末端端子一樣， EK1110 EtherCAT 擴展端子與 EtherCAT 端子塊的末端相連。 該端子可以將以太網電纜與 RJ 45 接頭相連，因此可將 EtherCAT 電纜束的電氣隔離長度增 在 E EK1110 加最多100 m。 EK1110 端子中， 總線信號被動態轉換為 100baseTX 以太網信號。 電路的電源通過 E 總線提供。無需執行參數化或組態任務。
10
技術數據
技術數據
EK1110
將 E 總 線 信 號 轉 換 為 100baseTX 以 太 網 信 號 以 擴 展 EtherCAT 網絡 Ethernet CAT 5 電纜 100 m (100baseTX) 任何 EtherCAT 協議 大約 1 μs 100 Mbit/s 不需要 1 個 RJ 45 接口 總線提供 大約 150 mA 500 Vrms（供電電壓/以太網）
在 EtherCAT 系統中的任務 數據傳輸介質 模塊之間的距離 協議 延遲 傳輸速率 配置 總線連接 電源 E E 總線供電電流 電氣隔離
|
技術參數
|
EK1521
|
EK1521-0010
|
|
EtherCAT 系統內的任務
|
通過多模玻璃纖維連接 EtherCAT 分支耦合器
|
通過單模玻璃纖維連接 EtherCAT 分支耦合器
|
|
數據傳輸介質
|
多模玻璃光纖 50/125 μm（MM）
|
單模玻璃光纖 9/125 μm（SM）
|
|
站點之間的距離
|
最長 2 千米（100BASE-TX）
|
最長 20 千米（100BASE-TX）
|
|
EtherCAT 端子模塊數量
|
–
|
|
外設信號類型/數量
|
–
|
|
協議
|
EtherCAT
|
|
延遲
|
約 1 ?s
|
|
數據傳輸率
|
100 Mbaud
|
|
組態
|
無需配置
|
|
總線接口
|
1 x SC 全雙工
|
|
電源
|
由 E-bus 供電
|
|
E-bus 電流消耗
|
通常為 350 mA
|
|
24 V DC 電流消耗
|
–
|
|
重量
|
約 65 g
|
|
工作/儲藏溫度
|
-25…+60 °C/-40…+85 °C
|
|
相對濕度
|
95 %，無冷凝
|
|
抗振/抗沖擊性能
|
符合 EN 60068-2-6/EN 60068-2-27 標準
|
|
抗電磁干擾/抗電磁輻射性能
|
符合 EN 61000-6-2/EN 61000-6-4 標準
|
|
防護等級/安裝位置
|
IP 20/可變
|
|
認證
|
CE，UL，Ex
|
BECKHOFF倍福ek1520耦合器ek1521 全新現貨端子模塊
|
EK1521
|
EtherCAT Terminals
|
1-port EtherCAT multi-mode fibre optic junction
|
|
EK1521-0010
|
EtherCAT Terminals
|
1-port EtherCAT singlemode fibre optic junction, distance between stations up to 20 km
|
|
EK1541
|
EtherCAT Terminals
|
EtherCAT Coupler with ID switch, plastic optical fibre for E-bus terminals (ELxxxx)
|
|
EK1561
|
EtherCAT Terminals
|
1-port EtherCAT plastic optical fibre junction
|
|
EK1110
|
EtherCAT Terminals
|
EtherCAT extension
|
|
EK1814
|
EtherCAT Terminals
|
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital I/Os:
– 4 digital inputs 24 V DC, filter 3.0 ms, type 3
– 4 digital outputs 24 V DC, 0.5 A, 1-wire system
|
|
ek1818
|
EtherCAT Terminals
|
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital I/Os:
– 8 digital inputs 24 V DC, filter 3.0 ms, type 3
– 4 digital outputs 24 V DC, 0.5 A, 1-wire system
|
|
EK1828
|
EtherCAT Terminals
|
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital I/Os:
– 4 digital inputs 24 V DC, filter 3.0 ms, type 3
– 8 digital outputs 24 V DC, 0.5 A, 1-wire system
|
|
EK1828-0010
|
EtherCAT Terminals
|
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital I/Os:
– 8 digital outputs 24 V DC, 0.5 A, 1-wire system
|
|
EK1914
|
EtherCAT Terminals
|
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital standard and safety I/Os:
– 6 digital inputs, 2 of which are fail-safe inputs, 24 V DC, filter 3.0 ms, type 3
– 6 digital outputs, 2 of which are fail-safe outputs, 24 V DC, 0.5 A, 1-wire system
|
|
EK3100
|
EtherCAT Terminals
|
PROFIBUS Bus Coupler for EtherCAT Terminals (ELxxxx)
|
|
EK5100
|
EtherCAT Terminals
|
CANopen Bus Coupler for EtherCAT Terminals (ELxxxx)
|
|
EK5200
|
EtherCAT Terminals
|
DeviceNet Bus Coupler for EtherCAT Terminals (ELxxxx)
|
|
EK9000
|
EtherCAT Terminals
|
Ethernet Bus Coupler for EtherCAT Terminals (ELxxxx)
|
|
EK9300
|
EtherCAT Terminals
|
PROFINET RT Bus Coupler for EtherCAT Terminals (ELxxxx)
|
|
EK9500
|
EtherCAT Terminals
|
EtherNet/IP Bus Coupler for EtherCAT Terminals (ELxxxx)
|
|
EK9700
|
EtherCAT Terminals
|
SERCOS III Bus Coupler for EtherCAT Terminals (ELxxxx)
|
|
EK1960
|
EtherCAT Terminals
|
TwinSAFE Compact Controller for EtherCAT Terminals (ELxxxx) with integrated I/Os:
– 20 safe digital inputs 24 V DC
– 8 safe digital outputs 24 V DC, 0.5 A, 1-wire system
– 2 safe digital outputs, potential-free make contacts
|
|
EL1002
|
EtherCAT Terminals
|
2-channel digital input terminal 24 V DC, filter 3.0 ms, 4-wire system
|
|
在線咨詢 
