Jupiter A鑄鐵焊條

Shield Metal Arc Welding(SMAW - Stick)

For all Cast Iron - Meehanite,ductile, mealleable, gray cast irons and steel to cast iron.

適用于所有鑄鐵-Meehanite孕育鑄鐵、球墨鑄鐵、可鍛鑄鐵、灰口鑄鐵和鋼至鑄鐵的焊接。

Features

亮點

High Strength 79,000psi/545MPa

抗拉強度高達79,000psi/545MPa

Use On All Weldable Grades Of Cast Iron

用于所有可焊接等級的鑄鐵

All positions

全位置焊接

Welds Over Dirt and Oil

可以在油污上直接焊接

Eliminates Porosity

無氣孔

Ideal For Cast Iron To Steel Joining

鑄鐵與鋼連接的理想選擇

Prevents Hard Spots

不會出現硬點

Easy To Use

易于使用

Machineable deposits

可加工熔敷層

Welds Over Slag

熔渣上的焊縫

Ductile Deposits

韌性熔敷層

No preheat required

不需要預熱

Characteristics

特點

Jupiter-A has been engineered for the maintenance welder who must weld dirty, oil-soaked castings of unknown compositions. Sound, non-porous welds are produced without special preparation. Successful results are possible even when the joint is restrained.

Jupiter-A專為必須焊接成分未知的臟、浸油鑄件的維護焊工設計。在無需特殊處理的情況下，即可產生完好、無孔的焊縫。即使接頭受到約束，也有可能取得成功。

Jupiter-A makes it possible to repair machines and equipment in place without expensive tear down, thereby avoiding costly down time.

Jupiter-A可以在不需要拆卸的情況下將機器和設備維修到位，從而避免了高成本的停機時間。

Technical技術規格

Size and Amps AC/DC+(DCEP)

Best Practices Application 應用

Remove cracks using grinder or Electra去除裂縫。

Stop drill crack ends.實施止裂孔。

Use medium arc and stringer beads. 使用中等弧度和線狀焊道。

Skip weld and prevent overheating 跳焊并防止過熱

Light peening recommended. 建議進行輕敲擊。

For critical or heavy parts preheat to 500?F(260?C). 對于關鍵或重型零件，預熱至500?F（260?C）。

Cool slowly after welding. 焊后緩冷。